How to identify 1st image of a bracketed group?

Questions that don't fit into any of the other categories

Re: How to identify 1st image of a bracketed group?

Postby David_PPP » Thu Jan 24, 2019 11:34 pm

Thank you so much for your help.
What I see is that the following conditions need to be met to work on Canon:
1) Exposure Mode = Auto Bracket
2) AEB Bracket Value = 0

I've tried to attach files with:
a) 5 bracketed images
b) 1 normal image
c) screenshots of the relevant fields for 2 bracketed shots and 1 "normal" shot
I'll add extra posts with more files as I can only seem to add 3 at a time.

I look forward to the next release.
Thanks again.

_I9A9657 Metadata Screenshot 1.png
_I9A9657 Metadata Screenshot 1.png (89.76 KiB) Viewed 1509 times

_I9A9657 Metadata Screenshot 2.png
_I9A9657 Metadata Screenshot 2.png (107.03 KiB) Viewed 1509 times

_I9A9658 Metadata Screenshot 2.png
_I9A9658 Metadata Screenshot 2.png (66.64 KiB) Viewed 1509 times
David_PPP
 
Posts: 8
Joined: Sun Jan 20, 2019 6:36 pm

Re: How to identify 1st image of a bracketed group?

Postby David_PPP » Thu Jan 24, 2019 11:35 pm

More files:

_I9A9658 Metadata Screenshot 1.png
_I9A9658 Metadata Screenshot 1.png (83.81 KiB) Viewed 1509 times

_I9A9662 Metadata Screenshot.png
_I9A9662 Metadata Screenshot.png (76.44 KiB) Viewed 1509 times
David_PPP
 
Posts: 8
Joined: Sun Jan 20, 2019 6:36 pm

Re: How to identify 1st image of a bracketed group?

Postby David_PPP » Thu Jan 24, 2019 11:37 pm

Image files:
Last edited by TheBrew on Fri Jan 25, 2019 11:39 am, edited 1 time in total.
Reason: Got 'em, thanks. Removed - privacy.
David_PPP
 
Posts: 8
Joined: Sun Jan 20, 2019 6:36 pm

Re: How to identify 1st image of a bracketed group?

Postby TheBrew » Fri Jan 25, 2019 5:49 pm

Can confirm that it'll work on the files you attached.

I don't have an estimate for when 4.4.6 will be out, sorry, but at least you know the feature is coming. :)
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4592
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark

Re: How to identify 1st image of a bracketed group?

Postby David_PPP » Sat Jan 26, 2019 9:20 pm

Great news that it will work. Thank you very much.
David_PPP
 
Posts: 8
Joined: Sun Jan 20, 2019 6:36 pm

Re: How to identify 1st image of a bracketed group?

Postby TheBrew » Fri Feb 08, 2019 7:27 pm

4.4.6 was just approved and should show up in your updates soon.

The video I posted previously will also mark regular non-bracketed shots as the "first shot" so they'll show up when filtered. If you want to *only* see the first shots of bracketed shots, you need to:

Add a new Action task and call it, say, "Bracketed check". Tap the + sign and add a Condition action where: if -> Bracket mode -> is -> AEB -> then perform task -> the tagging task I set up in the video.

Once added, make that new action task the default one and you should be good to go.

For others reading along: Not all cameras add the bracketing metadata to the files and if they do the fields and value can differ. In the action above, the 'AEB' value is specific for Canon EOS cameras. On Nikon D750 the condition check needed to be '48' instead of 'AEB'. If you're having issues, it can be helpful to look for clues in the metadata of a sample file by tapping and holding the thumbnail in the filmstrip and then pick 'File information'.
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4592
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark

Previous

Return to Other Questions

Who is online

Users browsing this forum: No registered users and 4 guests

cron