Multiple FlashAir Cards in Network

Help and ask for help on Toshiba FlashAir card related problems

Multiple FlashAir Cards in Network

Postby dr_tiv » Mon May 13, 2019 3:21 pm

I'm successfully using a FlashAir W04 in STA mode with Shuttersnitch. We have multiple people using Shuttersnitch in the same network. With the older EyeFi Cards we could set Shuttersnitch to connect to just one EyeFi card so we had one iPad connected to only one EyeFi Card. This way if different photographers shoot at the same time the photos will only come up in their iPad. How can I do this with FlashAir cards in STA mode? I know each FlashAir card need different APPNAMEs but how do I set our iPads to only connect to one FlashAir card (in STA mode) on the same network and not import photos from the others? Please note, using STA (Station) mode is important to us as we simultaneously MirrorCast our iPad Screens to large TVs.

My Current Config File in my FlashAir looks as follows:
[Vendor]
CIPATH=/DCIM/100__TSB/FA000001.JPG
ID=FLASHAIR
APPMODE=5
APPNAME=flashair
APPSSID=ShuttersnitchPhotographers
APPNETWORKKEY=**********
VERSION=F15DBW3BW4.00.03
CID=02544d455945464955f2c06f7b011c01
PRODUCT=FlashAir
VENDOR=TOSHIBA
DHCP_Enabled=YES
dr_tiv
 
Posts: 2
Joined: Fri Sep 21, 2012 1:12 am

Re: Multiple FlashAir Cards in Network

Postby TheBrew » Mon May 13, 2019 3:45 pm

Currently ShutterSnitch will connect to any card it finds. But I'll see if I can't change that. Will post back when I have more info. :)
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4195
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark


Return to Toshiba FlashAir cards

Who is online

Users browsing this forum: No registered users and 1 guest