Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Help and ask for help on your Canon wireless file transmitter

Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby cksmy » Sat Nov 13, 2021 1:01 pm

I just signed up for Shutter snitch and I'm having the hardest time trying to figure out how I can connect my Canon 1DX Mk II via ethernet cable and ethernet to lightning adapter to my iPhone12.

Here's what I have tried.

iPhone 12 setup:
Settings > Ethernet > USB 10/100 LAN
Configure IP: Manual
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Configure DNS: Automatic
Configure Proxy: Off
FYI: I turned off the wifi on my iPhone as Shuttersnitch kept picking up that address

Shuttersnitch Setup
Username: snitch
FTP port: 26000
Collections: ingest

On Canon 1DX Mk II
1. Communication Method: FTP trans.
2. LAN type: Wired
3. IP address set: Manual setting
4. IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: Disable
DNS address: Disable
IP security: Disable
5. FTP mode: FTP
6. FTP server
Address setting: 192.168.1.1
Port number setting: 26000
7. Passive mode: Disable
8. Proxy server: Disable
9: Login method: Login Password
Login name: snitch
Login password: I used the same password I set up with shuttersnitch when I first used it
10: Target folder: Root folder
11: Busy....... please wait.
12: Cannot connect to FTP server

Can anyone help me figure out where I'm going wrong?
cksmy
 
Posts: 5
Joined: Fri Nov 12, 2021 10:39 pm

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby TheBrew » Sat Nov 13, 2021 1:16 pm

Hmm. All of that looks fine to me.

First, just be be sure (it's been an issue for a few users before) double check the FTP port you've set in the camera setup is 26000 - with 3 zeros. 2600 can look like 26000 in the heat of the moment. :)

Try going into the ShutterSnitch settings, scroll all the way to the bottom and turn on 'Traffic Inspector'. Then try connecting again - do you see anything interesting being logged?
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4687
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby TheBrew » Sat Nov 13, 2021 1:20 pm

Another thought: Just in case your home wi-fi is also using the 192.168.1.x range - I'd change the manual ethernet addresses to 192.168.2.2 for the iPhone (and FTP server address) and 192.168.2.1 for the camera. As you can see I also flipped the suffix for the phone and camera so the camera is the .1 - just in case it likes to be the "master" of the network.
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4687
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby cksmy » Sat Nov 13, 2021 3:18 pm

TheBrew wrote:Another thought: Just in case your home wi-fi is also using the 192.168.1.x range - I'd change the manual ethernet addresses to 192.168.2.2 for the iPhone (and FTP server address) and 192.168.2.1 for the camera. As you can see I also flipped the suffix for the phone and camera so the camera is the .1 - just in case it likes to be the "master" of the network.


Thanks for your reply. I have changed the settings to how you stated above and I still can't seem to connect. I ran the 'Traffick Inspector' but I'm not sure what it's telling me. I'll post it below incase someone knows how to decipher it.

Code: Select all
07:39:46.362 ShutterSnitch v5.2.7 (49440) User since build 49440
Device: iPhone13,3, 64-bit, iOS 15.0.2
In-App Purchases: Latest subscription expiration/renewal date: Nov 19, 2021 at 3:03:29 PM
Free memory: 1,455,833,088
Free disk space: 36,282,667,008
Time: Nov 13, 2021 at 7:39:46 AM
IP: 192.168.2.2
FTP port: 26000
WebDAV port: 8080
Eye-Fi: Disabled (0 cards)
PTP/IP: Auto
Transcend Wi-Fi card transfers: Disabled
Toshiba FlashAir transfers: Disabled
ezShare transfers: Disabled
PQI Air / Air Direct transfers: Disabled
GoPro transfers: Disabled
Panasonic LUMIX LINK transfers: Disabled
Sony DLNA transfers: Disabled
Canon UPnP transfers: Disabled
Fujifilm transfers: Disabled
07:39:46.366 Listening…
07:39:46.792 M-SEARCH: Marco?
07:39:50.301 M-SEARCH: Marco?
07:39:53.811 M-SEARCH: Marco?
07:39:57.321 M-SEARCH: Marco?
07:40:03.532 M-SEARCH: Marco?
07:40:07.039 M-SEARCH: Failed to begin receiving ((null))
07:40:10.547 M-SEARCH: Failed to begin receiving ((null))
07:40:14.056 M-SEARCH: Failed to begin receiving ((null))
07:40:17.564 M-SEARCH: Failed to begin receiving ((null))
07:40:21.071 M-SEARCH: Failed to begin receiving ((null))
07:40:24.580 M-SEARCH: Failed to begin receiving ((null))
07:40:28.089 M-SEARCH: Failed to begin receiving ((null))
07:40:31.597 M-SEARCH: Failed to begin receiving ((null))
07:40:35.107 M-SEARCH: Failed to begin receiving ((null))
07:40:38.616 M-SEARCH: Failed to begin receiving ((null))
07:40:42.124 M-SEARCH: Failed to begin receiving ((null))
07:40:45.631 M-SEARCH: Failed to begin receiving ((null))
07:40:49.140 M-SEARCH: Failed to begin receiving ((null))
07:40:52.661 M-SEARCH: Failed to begin receiving ((null))
07:40:56.263 M-SEARCH: Failed to begin receiving ((null))
07:40:59.867 M-SEARCH: Failed to begin receiving ((null))
07:41:03.439 M-SEARCH: Failed to begin receiving ((null))
07:41:07.045 M-SEARCH: Failed to begin receiving ((null))
07:41:10.650 M-SEARCH: Failed to begin receiving ((null))
07:41:14.258 M-SEARCH: Failed to begin receiving ((null))
07:41:17.197 Pausing services
07:43:14.775 Started WebDAV server on port 8080
07:43:14.782 Starting services
07:43:14.803 M-SEARCH: Failed to begin receiving ((null))
07:43:15.787 Failed to get IP address from devices: {
    lo0 = "127.0.0.1";
    "pdp_ip0" = "10.11.14.79";
}
07:43:20.270 M-SEARCH: Failed to begin receiving ((null))
07:43:23.779 M-SEARCH: Failed to begin receiving ((null))
07:43:27.288 M-SEARCH: Failed to begin receiving ((null))
07:43:30.797 M-SEARCH: Failed to begin receiving ((null))
07:43:34.307 M-SEARCH: Failed to begin receiving ((null))
07:43:37.815 M-SEARCH: Failed to begin receiving ((null))
07:43:41.324 M-SEARCH: Failed to begin receiving ((null))
07:43:44.832 M-SEARCH: Failed to begin receiving ((null))
07:43:48.343 M-SEARCH: Marco?
07:43:51.853 M-SEARCH: Marco?
07:43:55.364 M-SEARCH: Marco?
07:43:58.874 M-SEARCH: Marco?
07:44:02.384 M-SEARCH: Marco?
07:44:05.894 M-SEARCH: Marco?
07:44:09.405 M-SEARCH: Marco?
07:44:12.915 M-SEARCH: Marco?
07:44:16.425 M-SEARCH: Marco?
07:44:19.936 M-SEARCH: Marco?
07:44:23.447 M-SEARCH: Marco?
07:44:26.958 M-SEARCH: Marco?
07:44:30.469 M-SEARCH: Marco?
07:44:33.979 M-SEARCH: Marco?
07:44:37.490 M-SEARCH: Marco?
07:44:41.001 M-SEARCH: Marco?
07:44:44.511 M-SEARCH: Marco?
07:44:48.022 M-SEARCH: Marco?
07:44:51.533 M-SEARCH: Marco?
07:44:55.044 M-SEARCH: Marco?
07:44:58.556 M-SEARCH: Marco?
07:45:02.067 M-SEARCH: Marco?
07:45:05.577 M-SEARCH: Marco?
07:45:09.089 M-SEARCH: Marco?
07:45:12.599 M-SEARCH: Marco?
07:45:16.110 M-SEARCH: Marco?
07:45:19.621 M-SEARCH: Marco?
07:45:23.132 M-SEARCH: Marco?
07:45:26.643 M-SEARCH: Marco?
07:45:30.154 M-SEARCH: Marco?
07:45:33.665 M-SEARCH: Marco?
07:45:37.176 M-SEARCH: Marco?
07:45:40.687 M-SEARCH: Marco?
07:45:44.198 M-SEARCH: Marco?
07:45:47.709 M-SEARCH: Marco?
07:45:51.221 M-SEARCH: Marco?
07:45:54.731 M-SEARCH: Marco?
07:45:58.243 M-SEARCH: Marco?
07:46:01.754 M-SEARCH: Marco?
07:46:05.265 M-SEARCH: Marco?
07:46:08.777 M-SEARCH: Marco?
07:46:12.287 M-SEARCH: Marco?
07:46:15.799 M-SEARCH: Marco?
07:46:19.311 M-SEARCH: Marco?
07:46:22.823 M-SEARCH: Marco?
07:46:26.334 M-SEARCH: Marco?
07:46:29.846 M-SEARCH: Marco?
07:46:33.358 M-SEARCH: Marco?
07:46:36.870 M-SEARCH: Marco?
07:46:40.383 M-SEARCH: Marco?
07:46:43.894 M-SEARCH: Marco?
07:46:47.407 M-SEARCH: Marco?
07:46:50.917 M-SEARCH: Marco?
07:46:54.429 M-SEARCH: Marco?
07:46:57.941 M-SEARCH: Marco?
07:47:01.453 M-SEARCH: Marco?
07:47:04.966 M-SEARCH: Marco?
07:47:08.477 M-SEARCH: Marco?
07:47:11.989 M-SEARCH: Marco?
07:47:15.498 M-SEARCH: Marco?
07:47:19.010 M-SEARCH: Marco?
07:47:22.522 M-SEARCH: Marco?
07:47:26.034 M-SEARCH: Marco?
07:47:29.546 M-SEARCH: Marco?
07:47:33.057 M-SEARCH: Marco?
07:47:36.661 M-SEARCH: Marco?
07:47:40.267 M-SEARCH: Marco?
07:47:43.872 M-SEARCH: Marco?
07:47:47.475 M-SEARCH: Failed to begin receiving ((null))
07:47:51.078 M-SEARCH: Failed to begin receiving ((null))
07:47:54.673 M-SEARCH: Failed to begin receiving ((null))
07:47:58.283 M-SEARCH: Failed to begin receiving ((null))
07:48:00.728 Pausing services
07:53:33.028 Started WebDAV server on port 8080
07:53:33.037 Starting services
07:53:33.058 M-SEARCH: Failed to begin receiving ((null))
07:53:34.041 Failed to get IP address from devices: {
    lo0 = "127.0.0.1";
    "pdp_ip0" = "10.11.14.79";
}
07:53:36.560 M-SEARCH: Failed to begin receiving ((null))
07:53:40.089 M-SEARCH: Failed to begin receiving ((null))
07:53:43.640 M-SEARCH: Failed to begin receiving ((null))
07:53:47.165 M-SEARCH: Failed to begin receiving ((null))
07:53:50.692 M-SEARCH: Failed to begin receiving ((null))
07:53:54.264 M-SEARCH: Failed to begin receiving ((null))
07:53:57.800 M-SEARCH: Failed to begin receiving ((null))
07:54:01.358 M-SEARCH: Failed to begin receiving ((null))
07:54:04.175 Pausing services
09:10:01.581 Started WebDAV server on port 8080
09:10:01.589 Starting services
09:10:01.609 M-SEARCH: Marco?
09:10:05.112 M-SEARCH: Marco?
09:10:08.624 M-SEARCH: Marco?
09:10:12.136 M-SEARCH: Marco?
09:10:15.648 M-SEARCH: Marco?
09:10:19.159 M-SEARCH: Marco?
09:10:22.671 M-SEARCH: Marco?
09:10:26.183 M-SEARCH: Marco?
09:10:29.695 M-SEARCH: Marco?
09:10:33.207 M-SEARCH: Marco?
09:10:36.719 M-SEARCH: Marco?
09:10:40.231 M-SEARCH: Marco?
09:10:43.743 M-SEARCH: Marco?
09:10:47.255 M-SEARCH: Marco?
09:10:50.768 M-SEARCH: Marco?
09:10:54.281 M-SEARCH: Marco?
09:10:57.793 M-SEARCH: Marco?
09:11:01.306 M-SEARCH: Marco?
09:11:04.819 M-SEARCH: Marco?
09:11:08.331 M-SEARCH: Marco?
09:11:11.842 M-SEARCH: Marco?
09:11:15.353 M-SEARCH: Marco?
09:11:18.866 M-SEARCH: Marco?
09:11:22.378 M-SEARCH: Marco?
09:11:25.890 M-SEARCH: Marco?
09:11:29.403 M-SEARCH: Marco?
09:11:32.915 M-SEARCH: Marco?
09:11:36.426 M-SEARCH: Marco?
09:11:39.938 M-SEARCH: Marco?
09:11:43.450 M-SEARCH: Marco?
09:11:46.963 M-SEARCH: Marco?
09:11:50.476 M-SEARCH: Marco?
09:11:53.988 M-SEARCH: Marco?
09:11:57.501 M-SEARCH: Marco?
09:12:01.012 M-SEARCH: Marco?
09:12:04.525 M-SEARCH: Marco?
09:12:08.037 M-SEARCH: Marco?
09:12:11.550 M-SEARCH: Marco?
09:12:15.063 M-SEARCH: Marco?
09:12:18.574 M-SEARCH: Marco?
09:12:22.086 M-SEARCH: Marco?
09:12:26.071 M-SEARCH: Marco?
09:12:32.181 M-SEARCH: Marco?
09:12:35.690 M-SEARCH: Marco?
09:12:39.201 M-SEARCH: Marco?
09:12:42.714 M-SEARCH: Marco?
09:12:46.227 M-SEARCH: Marco?
09:12:49.739 M-SEARCH: Marco?
09:12:53.252 M-SEARCH: Marco?
09:12:56.765 M-SEARCH: Marco?
09:13:00.278 M-SEARCH: Marco?
09:13:03.791 M-SEARCH: Marco?
09:13:07.303 M-SEARCH: Marco?
09:13:10.816 M-SEARCH: Marco?
09:13:14.329 M-SEARCH: Marco?
09:13:17.841 M-SEARCH: Marco?
09:13:21.353 M-SEARCH: Marco?
09:13:24.864 M-SEARCH: Marco?
09:13:28.376 M-SEARCH: Marco?
09:13:31.889 M-SEARCH: Marco?
09:13:35.402 M-SEARCH: Marco?
09:13:38.913 M-SEARCH: Marco?
09:13:42.424 M-SEARCH: Marco?
09:13:45.937 M-SEARCH: Marco?
0b4437896f46a35856e67cc154b1d2f1
cksmy
 
Posts: 5
Joined: Fri Nov 12, 2021 10:39 pm

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby TheBrew » Sat Nov 13, 2021 3:58 pm

All those "M-SEARCH" lines are related to the PTP/IP support being on. You can turn it off if you're just going to use FTP. (ShutterSnitch settings -> 'PTP/IP (NIKON WU / EOS UTILITY)' section) It doesn't really matter if it's enabled or not - but it is using CPU, so you'll get better performance/less battery usage if it's off.

If you tried connecting with the camera while this log was created, the camera doesn't even reach ShutterSnitch.

That narrows things down to the networking itself. I was thinking that maybe disabling the Gateway in the camera settings could mess things up, so try:

Manual config on iPhone:
IP Address 192.168.2.2
Subnet Mask 255.255.255.0
Router 192.168.2.1

Manual IP on camera:
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
Gateway 192.168.2.1

If that doesn't help, the connection wizard sometimes ignores the port and just goes with the standard port 21 instead of 26000. So try changing to 21 in both the camera setup and in the ShutterSnitch settings (second setting at the top) and see if that helps.

Keep the Traffic Inspector running and feel free to post a new log if it still doesn't work, but something interesting pops up.
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4687
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby cksmy » Sat Nov 13, 2021 4:36 pm

TheBrew wrote:All those "M-SEARCH" lines are related to the PTP/IP support being on. You can turn it off if you're just going to use FTP. (ShutterSnitch settings -> 'PTP/IP (NIKON WU / EOS UTILITY)' section) It doesn't really matter if it's enabled or not - but it is using CPU, so you'll get better performance/less battery usage if it's off.

If you tried connecting with the camera while this log was created, the camera doesn't even reach ShutterSnitch.

That narrows things down to the networking itself. I was thinking that maybe disabling the Gateway in the camera settings could mess things up, so try:

Manual config on iPhone:
IP Address 192.168.2.2
Subnet Mask 255.255.255.0
Router 192.168.2.1

Manual IP on camera:
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
Gateway 192.168.2.1

If that doesn't help, the connection wizard sometimes ignores the port and just goes with the standard port 21 instead of 26000. So try changing to 21 in both the camera setup and in the ShutterSnitch settings (second setting at the top) and see if that helps.

Keep the Traffic Inspector running and feel free to post a new log if it still doesn't work, but something interesting pops up.


Thanks again for trying to help me figure this out.

Here's what I have done. I turned off the PTP/IP in the shuttersnitch settings. I then dialed in the settings as mentioned above. After I entered those settings the camera's last screen display read Busy.....please wait. I waited at least 2 minutes and nothing changed. Here is the traffic inspector from that test.

Code: Select all
10:29:30.657 ShutterSnitch v5.2.7 (49440) User since build 49440
Device: iPhone13,3, 64-bit, iOS 15.0.2
In-App Purchases: Latest subscription expiration/renewal date: Nov 19, 2021 at 3:03:29 PM
Free memory: 779,632,640
Free disk space: 36,376,768,512
Time: Nov 13, 2021 at 10:29:30 AM
IP: 192.168.2.2
FTP port: 26000
WebDAV port: 8080
Eye-Fi: Disabled (0 cards)
PTP/IP: Disabled
Transcend Wi-Fi card transfers: Disabled
Toshiba FlashAir transfers: Disabled
ezShare transfers: Disabled
PQI Air / Air Direct transfers: Disabled
GoPro transfers: Disabled
Panasonic LUMIX LINK transfers: Disabled
Sony DLNA transfers: Disabled
Canon UPnP transfers: Disabled
Fujifilm transfers: Disabled
10:29:30.661 Listening…
543232b0a0f7b16c419aaa77887d9fb0
cksmy
 
Posts: 5
Joined: Fri Nov 12, 2021 10:39 pm

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby TheBrew » Sat Nov 13, 2021 4:48 pm

According to that log, the FTP server in ShutterSnitch is still running on port 26000. Are you sure it’s changed to 21 in the ShutterSnitch settings?
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4687
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby cksmy » Sat Nov 13, 2021 4:59 pm

TheBrew wrote:According to that log, the FTP server in ShutterSnitch is still running on port 26000. Are you sure it’s changed to 21 in the ShutterSnitch settings?


On that initial test I was in port 26000. I have now done a test was set to 00021 on shuttersnitch as that is how it it read on the camera. Here is that traffic inspector report.

Code: Select all
10:53:11.649 ShutterSnitch v5.2.7 (49440) User since build 49440
Device: iPhone13,3, 64-bit, iOS 15.0.2
In-App Purchases: Latest subscription expiration/renewal date: Nov 19, 2021 at 3:03:29 PM
Free memory: 613,859,328
Free disk space: 36,392,222,720
Time: Nov 13, 2021 at 10:53:11 AM
IP: 192.168.2.2
FTP port: 21
WebDAV port: 8080
Eye-Fi: Disabled (0 cards)
PTP/IP: Disabled
Transcend Wi-Fi card transfers: Disabled
Toshiba FlashAir transfers: Disabled
ezShare transfers: Disabled
PQI Air / Air Direct transfers: Disabled
GoPro transfers: Disabled
Panasonic LUMIX LINK transfers: Disabled
Sony DLNA transfers: Disabled
Canon UPnP transfers: Disabled
Fujifilm transfers: Disabled
10:53:11.654 Listening…
10:53:14.519 Starting services
10:56:06.606 Pausing services
10:56:07.850 Started WebDAV server on port 8080
10:56:07.854 Starting services
a24a2cf82b0b1dee3dad8a55b691ccdd
cksmy
 
Posts: 5
Joined: Fri Nov 12, 2021 10:39 pm

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby cksmy » Sat Nov 13, 2021 5:05 pm

cksmy wrote:
TheBrew wrote:According to that log, the FTP server in ShutterSnitch is still running on port 26000. Are you sure it’s changed to 21 in the ShutterSnitch settings?


On that initial test I was in port 26000. I have now done a test was set to 00021 on shuttersnitch as that is how it it read on the camera. Here is that traffic inspector report.

Somehow it is now working. I am able to send images to the Ingest Folder.
cksmy
 
Posts: 5
Joined: Fri Nov 12, 2021 10:39 pm

Re: Canon 1DX Mk II w/ethernet cable and adapter to iPhone

Postby TheBrew » Sat Nov 13, 2021 5:10 pm

Wonderful! The hardest part with FTP setups is what you just went through. From now on it should “just work”. Happy shooting. :)
Support the development of ShutterSnitch: Rate/review it in iTunes, Tweet about it, make Youtube videos, blog about it.. Get the word out.
TheBrew
The Developer
 
Posts: 4687
Joined: Wed May 05, 2010 8:48 pm
Location: Denmark


Return to Canon WFT / EOS 6D/70D/760D/M3/R / PowerShot wi-fi

Who is online

Users browsing this forum: No registered users and 1 guest